Thermography Inspection
Thermography is traditionally used for fast, reliable inspection of electrical equipment and switchboards, bearings, thermal insulation, heat loss and energy conservation applications.
Today thermography is also successfully used in building inspection, for heat loss and energy conservation studies, moisture detection, and pest control applications.
We are current and official distributors of NEC AVIO (Japan) and Electrophysics (USA). We supply only high quality infrared thermal imaging cameras with specifications necessary for professional thermographic inspections.
Our excellent analysis software delivers enhanced, time-efficient report generation.
 |
Thermal Imaging: 12 steps toward better electrical inspectionThermal imaging is much less about what kind of infrared camera you use than it is about using the infrared camera you have well. Here are twelve steps that will help improve the results you are getting from this remarkable technology. |
 |
Secrets to an effective infrared condition monitoring program — Infrared routes
The most efficient infrared condition monitoring program is one that has a strong foundation of well designed and thoughtfully constructed routes. The key to success in your unique environment is to understand the six generic types of routes used by thermographers and where they can be applied.
|
 |
Improved safety during infrared inspections of electrical equipment
It is estimated that arc flash incidents cost organizations hundreds of millions of dollars. Updated just this year, NFPA 70E now includes specific references to thermal imaging and makes a number of important clarifications on electrical safety.
|
 |
Testing building envelope systems using infrared thermal imaging
This paper discusses applications for thermal imaging technology currently being used to inspect building envelopes, such as validation of structural details, verification of energy performance, location of moisture intrusion, and identification of structural and system degradation of roofs and facades.
|
 |
Locating levels in tanks and silos using infrared thermal imaging
When properly used, thermal imaging cameras can reveal not only liquid/gas interface, but also sludge buildup and floating materials such as waxes and foams; locate levels and bridging problems in silos containing fluidized solids. This paper discusses the parameters and limitations that must be addressed, shows techniques that can be employed, and illustrates the discussions with numerous thermal images.
|
 |
Understanding infrared camera thermal image quality
This paper’s objective is to help you simplify your understanding of how image quality is determined. Covered are three topics that directly influence thermal image quality: pixel resolution, thermal sensitivity, and non-uniformity correction.
|
Maintenance Level Infrared Thermal Imager — NEC ThermoShot F30
 |
This new thermal imager is presented by NEC Avio (Japan). F30 is a light weight, pocket sized camera which can capture both thermal and visible images simultaneously saving them in JPEG format on SD card. The new and unique feature is display of temperature data on the visual image.NEC ThermoShot F30 looks and operates like a standard compact digital camera. It is based on real 160 by 120 pixels detector with thermal resolution better than 0.1 degrees Celsius. Professionally designed NEC F30 can measure temperatures from −20°C to 350°C or from −20°C to 100°C.F30 can be focused as close as 10cm for reliable viewing of small objects (electronic components for example). |
Infrared Thermal Imager for General Inspections — NEC G30
 |
New infrared thermal imaging camera NEC G30 is ideal for predictive/preventive maintenance and building assessments. With 7 hours battery life and sophisticated features typically found only in high-end cameras it is ready for almost any job.The camera records high quality infrared images in JPG format (with all pixels calibrated) plus matching visual images of the target. Like NEC F30 it can be focused as close as 3″ for viewing of very small objects. Wide field of view (28°(H) x 21°(V)) matches most industrial tasks.NEC thermal imagers are well known for easy to use interface, best in class image quality and excellent reliability. This camera is built in Japan. |
Professional Range Thermo GEAR NEC G120/100
 |
The new Thermo GEAR G120/G100 is ideal thermography tool for Higher level maintenance and R&D work. Its shape is perfect for capturing images from any angle; a super-fine image enabling the detection of abnormalities in a wide range; an optical compatibility with telephoto lenses; support for high-temperature measurement; useful support functions to detect abnormal points without delay; management of a large amount of data and fast-report generation.Image quality is excellent with new detector engine, 320×240 pixels resolution. There is onboard recording and unique panoramic function.The weight is approximately 800 grams (including the battery pack), which is 500 grams lighter than previous models. It can also be set up on a tripod which can be required for prolonged monitoring or research work. |
Multi-Purpose Infrared Thermal Imaging Camera NEC R300
 |
This new infrared thermal imaging camera from NEC “InfRec R300″ is a brand-new, multipurpose, high-definition & high- performance model for Research and Development, predictive & preventive maintenance, quality control and other research and industrial applications.The camera incorporates the latest advanced infrared sensor technology and features:
Applications — building inspections, power equipment diagnostics, R&D, PPM, etc. |
Top Class High Resolution Infrared Thermal Imager NEC H2640
 |
This thermal imager features:
And many advanced features you would expect from a top of the range camera. This system can be used as a stand-alone camera or controlled by a remote PC using software. This system is usually required for the most demanding inspection work including inspection of Power Lines and for Research applications. |
Hot Shot HD-B series — Buildings inspections in 640×480 resolution
 |
The building inspection professional’s choice in high performance infrared cameras. HotShot HD-B can be used to measure the temperature of objects up to 100°C.The camera integrates state-of-the-art infrared imaging technology including 640×480 resolution detector, dual-laser target highlighter, mega-pixel visible camera and advanced image fusion to greatly improve image interpretation and the quality of infrared inspection reports. Its highly intuitive graphical user touch screen interface puts nearly all commands within a single touch, eliminating complex pull down menu controls.HotShot HD-B is simply the best value in high resolution camera market today. |
Hot Shot HD-S series — Maintenance with 640×480 resolution
|
HotShot HD-S is a high performance portable infrared camera with many of the features and capabilities of higher-priced cameras. The camera can be used to measure the temperature of objects up to 350°C, and features design innovations that make infrared inspections faster, and diagnoses more accurate while ensuring increased operator safety.The camera includes stunning 640×480 infrared details combined with an integrated high quality mega-pixel visible camera greatly improves image interpretation and the quality of infrared inspection reports. In addition, the HD-S includes a unique laser highlighting system that matches the thermal image, image fusion, routing and a touch screen for easy data entry.HotShot HD-S is simply the best value on the market today. |
Hot Shot HD-XT series — Maintenance in 640×480 with full software power
|
HotShot HD-XT is the professional grade infrared camera without the sticker shock.HotShot HD-XT can be used to measure the temperature of objects up to 500°C, and features design innovations that make infrared inspections faster, and diagnoses more accurate while ensuring increased operator safety.Stunning 640×480 infrared details combined with an integrated high quality mega-pixel visible camera greatly improves image interpretation and the quality of infrared inspection reports.In addition, the HD-XT includes a unique laser highlighting system that matches the thermal image, image fusion, routing capabilities to map areas requiring scans, and a touch screen for easy data entry.Comes with full software pack and inspection routing option is available.HotShot HD-XT is simply the best value on the market today. |
Thermal Imager for Daily Maintenance — Testo 875
 |
Thermal imager Testo 875 is a reliable, solid tool for your daily maintenance. With temperature resolution of < 80 mK, changeable lenses and an integrated digital camera, you can discover weak spots in buildings quicker and securely. Thermal imaging helps you localize leakage more precisely, you can detect defective insulation directly looking at the real time thermal image.Most important advantages of this thermal imager include:
|
Thermal Imager with 320×240 pixels detector — Testo 882
 |
Thermal imager Testo 882 with a sensitive 320×240 pixels detector stands out with precise, sharp infrared images.With 76,800 temperature measuring points, it sees every detail on the measured object. This makes it even easier for you to detect anomalies and weaknesses from greater distances.Most important advantages of this thermal imager include:
Testo 882 Industry (5 MB) |
Thermal imager with superior image quality — Testo 885
 |
The thermal imager Testo 885 in a newly developed system with innovative ability to automatically increase optical resolution to 640×480 pixles at a price of 320×240 pixels cameras. The ideal ergonomics with fold-out, rotatable display as well as intuitive hybrid operation provide best usability in every application. The combination of 640×480 upscaling and the outstanding NETD < 30 mK ensure sharp and meaningful thermal images.The thermal imager Testo 885 automatically creates a high resolution image by combining a number of images the camera takes while operator’s hand is moving when acquiring an image. |
Triple camera (IR, UV and TV) — Airborne Inspections
 |
This small thermal infrared camera combines benefits of three unique sensors including IR (thermal imaging) with 640×480 pixels resolution, UV with Bi spectral detector (Corona camera), and TV with 10x-36x zoom.The system was specifically designed for airborne power lines inspections. Thanks to a fully digital 4-axis active gyro stabilization of aircraft movements and vibrations the camera delivers very stable imaging. High precision measurement accuracy, superb image quality and long wave solar reflection immunity provides outstanding performance for most applications. On screen graphics indicates Time and Date, GPS position, etc., and aluminium housing makes the camera reliable and lightweight.The radiometric output provides full thermal resolution digital images with real time temperature measurement for efficient thermal inspections. Moreover, the Bi spectral UV camera is the most sensitive bi-spectral imager with absolute solar blind performance that offers professional Corona and Arcing detection.Depending on the system configuration there is choice of two cameras 300 Triple and 400 Triple.Applications -airborne applications for powerlines inspections, firemapping, oil spill detection, and pipeline inspection. |
Incoming search terms:
- Security Camera distributor
- thermography cctv
- what are the preventive maintenance for IR CCTV dome camera system- NEC products
